具有多个执行机构Lurie系统的时滞相关稳定性

Ｌｕｒｉｅ时滞控制系统是工程实践中经常遇到的一类重要的非线性控制系统，本文根据微分方程理论，提出了不确定性具有多个执行机构的Ｌｕｒｉｅ时滞控制系统时滞相关稳定的充分性判据，并给出系统衰减速度的估计方法。该方法仅需假定时滞有界，因而其结论适扩用于变时滞的系统。文末给出应用本文结果的两个应用实例，并与相关成果进行了比较，计算结果表明了本文方法的有效性。     

Solar modulation model with reentrant particles

We developed a one dimensional model of particle transport in the heliosphere. As opposite to widely used models, we apply a method where a quasi-particle is traced back in time. The model gives us the possibility to work on the possible existence of reentrant particles in the heliosphere that can be hardly solved by the traditional forward tracking method. Particles escape from the heliosphere and may reenter back. We estimate how these particles affect the modulation process in the heliosphere. Presented here are the results for different values of particles mean free path in the interstellar space and for different interstellar magnetic field values.     

双拦截弹拦截单目标边界型微分对策制导律研究

针对战术弹道导弹、高超声速巡航导弹和无人飞行器等新型具有高机动性能的防空目标,为提高成功拦截的概率,采用多枚拦截弹进行拦截。应用微分对策理论,将双拦截弹拦截单目标的末段制导问题建模为“二对一追踪-逃逸”对策模型。考虑最大加速度约束,研究了两枚拦截弹的拦截空间分解和对策空间分布,并通过仿真研究了制导律性能。结果表明：采用两枚拦截弹拦截时,脱靶量对目标机动方向的转变时间具有很好的鲁棒性。     

载人航天器空气环境参数控制非定常仿真分析

为支持乘员在轨驻留,载人航天器需通过空气环境控制系统将众多设计参数和空气环境参数控制在指标范围内。文章建立了一种载人航天器空气环境非定常控制仿真分析模型,包括舱体模块、航天员模块、舱压控制模块、温湿度控制模块以及CO2净化模块。利用该模型分析了载人航天器空气环境参数随乘员代谢水平的非定常变化趋势,并评估了控制系统的工作性能。结果表明:乘员代谢水平变化对空气环境参数有显著影响,通过调节控制系统运行参数可将各空气参数控制在有效指标范围内。人区温度与O2分压、CO2分压和人区湿度有密切的影响关系,不可孤立地进行分析。为载人航天器空气环境参数控制系统的设计和流程改进提供了依据。     

Friction moment analysis of space gyroscope bearing with ribbon cage under ultra-low oscillatory motion

This paper presents the model of calculating the total friction moment of space gyroscope ball bearings which usually work under ultra-low oscillatory motion and are very sensitive to the friction moment. The aim is to know the proportion of the friction moment caused by each frictional source in the bearing＇s total friction moment, which is helpful to optimize the bearing design to deduce the friction moment. In the model, the cage dynamic equations considering six degree-of-freedom and the balls dynamic equations considering two degree-of-freedom were solved.The good trends with different loads between the measured friction moments and computational results prove that the model under constant rate was validated. The computational results show that when the speed was set at 5 r/min, the bearing＇s maximum total friction moment when oscillation occurred was obviously larger than that occurred at a constant rate. At the onset of each oscillatory motion, the proportion of the friction moment caused by cage in the bearing＇s total friction moment was very high, and it increased with the increasing speed. The analyses of different cage thicknesses and different clearances between cage pocket and ball show that smaller thickness and clearance were preferred.     

曲线物面边界条件在DGM中的应用研究

基于二维非结构网格,采用高精度间断Galerkin有限元方法数值求解定常Euler方程。为了有效克服传统的反射物面边界条件在物面处易于生成伪熵降低计算精度的缺陷,提出一种曲线物面边界条件,从而实现对物理模型而不是数值模型进行数值模拟。对经典圆柱亚音速无粘绕流进行数值模拟,结果表明:采用曲线物面边界条件之后,流场解的精度得到很好的提高;此外,在非常稀疏的网格上,通过提高基函数的阶次仍可以得到高精度的数值解。     

脉冲随机微分系统的均方指数稳定性分析

研究了脉冲随机时滞微分泛函方程的均方指数稳定性问题。利用Lyapunov-Razumikhin型方法及随机分析的一些技巧,建立了一类脉冲随机泛函微分方程的均方指数稳定性定理。     

两邻边铰支两邻边固支von-Karman矩形板的研究

本文运用双重Ｆｏｕｒｉｅｒ级数分析了受横向均布载荷作用下两邻边铰支两邻边固支矩形板的非线性弯曲问题。利用该级数正交性，可以把非线性偏微分控制方程化为含级数系数的非线性代数方程组并通过迭代解出所有系数。最后给出了位移和应力的计算结果。     

三维可压缩 Navier-Stokes 方程的间断Galerkin 有限元方法研究

拓展了二维间断 Galerkin(DG)有限元方法研究，将该数值方法用于三维可压缩欧拉方程和 Navier-Stokes方程的求解。基于六面体网格单元，采用插值方法将物面的四边形面网格单元构造为弯曲面网格单元，更好地表述了真实物面特征；物面边界相邻体网格单元相应构造为高阶体网格单元，其余体网格单元采用八节点六面体单元，以较小的计算代价使网格满足 DG 方法计算需求。通过对三维带 bump 管道内流、圆球绕流以及旋转流线体绕流进行的数值求解，验证了边界弯曲方法的可行性及 DG 方法的高精度特性。此外，由于采用了隐式计算方法，仅需较少的时间步就能迭代收敛。     

差动式电涡流传感器在摆式加速度计中的应用

差动电涡流传感器因结构简单、灵敏度高、线性范围大而得到广泛的应用。本文主要论述了差动式电涡流传感器在摆式加速度计中的应用,实验结果表明该设计结构合理、工艺可行,能满足使用要求。